Mechanical Properties of Cast Ti-6Al-4V Lattice Block StructuresQIZHEN LI; CHEN, Edward Y; BICE, Douglas R et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2008, Vol 39, Num 2, pp 441-449, issn 1073-5623, 9 p.Article

Prediction of the kinetics of static globularization of Ti-6Al-4VSEMIATIN, S. L; STEFANSSON, N; DOHERTY, R. D et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2005, Vol 36, Num 5, pp 1372-1376, issn 1073-5623, 5 p.Article

The Impact of Strain Reversal on Microstructure Evolution and Orientation Relationships in Ti-6Al-4V with an Initial Alpha Colony MicrostructureMUSZKA, K; LOPEZ-PEDROSA, M; RASZKA, K et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 13, pp 5997-6007, issn 1073-5623, 11 p.Article

Infrared brazing of Ti-6Al-4V using the Ti-15Cu-15Ni braze alloyCHANG, C.-T; SHIUE, R.-K.Journal of materials science. 2006, Vol 41, Num 7, pp 2145-2150, issn 0022-2461, 6 p.Article

The effect of strain-path reversal on cavitation during hot torsion of Ti-6Al-4VNICOLAOU, P. D; SEMIATIN, S. L.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2006, Vol 37, Num 12, pp 3697-3705, issn 1073-5623, 9 p.Article

Cavitation during hot-torsion testing of Ti-6Al-4VNICOLAOU, P. D; MILLER, J. D; SEMIATIN, S. L et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2005, Vol 36, Num 12, pp 3461-3470, issn 1073-5623, 10 p.Article

On the Texture Formation of Selective Laser Melted Ti-6Al-4VSIMONELLI, Marco; YAU YAU TSE; TUCK, Chris et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 6, pp 2863-2872, issn 1073-5623, 10 p.Article

Effect of strain reversal on the dynamic spheroidization of Ti-6Al-4V during hot deformationPOTHS, R. M; ANGELLA, G; WYNNE, B. P et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2004, Vol 35, Num 9, pp 2993-3001, issn 1073-5623, 9 p.Article

Long-term corrosion performances and cytocompatibility of nitrided Ti and Ti―6Al―4V alloy in severe functional conditionsION, R; VASILESCU, C; DROB, P et al.Materials and corrosion (1995). 2014, Vol 65, Num 6, pp 593-604, issn 0947-5117, 12 p.Article

The Effect of Multiple Surface Treatments on Biological Properties of Ti-6Al-4V AlloyPARSIKIA, Farhang; AMINI, Pupak; ASGARI, Sirous et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 10, pp 4588-4593, issn 1073-5623, 6 p.Article

Variant Selection During Cooling after Beta Annealing of Ti-6Al-4V Ingot MaterialSARGENT, G. A; KINSEL, K. T; PILCHAK, A. L et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2012, Vol 43, Num 10, pp 3570-3585, issn 1073-5623, 16 p.Conference Paper

A Self-Consistent Approach for Modeling the Flow Behavior of the Alpha and Beta Phases in Ti-6Al-4VJEOUNG HAN KIM; SEMIATIN, S. L; YOU HWAN LEE et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2011, Vol 42, Num 7, pp 1805-1814, issn 1073-5623, 10 p.Article

Durability of Fe-Co thin films on Ti-6Al-4VCHAN, K. S; HUDAK, S. J; LANNING, B. R et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2006, Vol 37, Num 5, pp 1443-1457, issn 1073-5623, 15 p.Article

Influence of sintering on the corrosion behavior of a Ti-6Al-4V alloyBAUTISTA, A; MORAL, C; BLANCO, G et al.Materials and corrosion (1995). 2005, Vol 56, Num 2, pp 98-103, issn 0947-5117, 6 p.Article

Control of Mechanical Properties of Three-Dimensional Ti-6Al-4V Products Fabricated by Electron Beam Melting with Unidirectional Elongated PoresIKEO, Naoko; ISHIMOTO, Takuya; SERIZAWA, A. I et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 10, pp 4293-4301, issn 1073-5623, 9 p.Article

Elevated-Temperature Mechanical Behavior of As-Cast and Wrought Ti-6Al-4V-1BCHEN, W; BOEHLERT, C. J; HOWE, J. Y et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2011, Vol 42, Num 10, pp 3046-3061, issn 1073-5623, 16 p.Article

Observations of Tool-Workpiece Interactions during Friction Stir Processing of Ti-6Al-4VPILCHAK, A. L; JUHAS, M. C; WILLIAMS, J. C et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2007, Vol 38A, Num 2, pp 435-437, issn 1073-5623, 3 p.Article

Observations of tool-workpiece interactions during friction stir processing of Ti-6Al-4VPILCHAK, A. L; JUHAS, M. C; WILLIAMS, J. C et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2007, Vol 38, Num 2, pp 435-437, issn 1073-5623, 3 p.Article

Infrared brazing of Ti-6Al-4V and 17-4 PH stainless steel with a nickel barrier layerSHIUE, R. K; WU, S. K; CHAN, C. H et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2006, Vol 37, Num 7, pp 2207-2217, issn 1073-5623, 11 p.Article

Microstructure and Texture Evolution During Sub-Transus Thermo-Mechanical Processing of Ti-6Al-4V-0.1B Alloy: Part II. Static Annealing in (α + β) RegimeROY, Shibayan; KARANTH, S; SUWAS, Satyam et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 7, pp 3322-3336, issn 1073-5623, 15 p.Article

Model based gap and melt rate control for VAR of Ti-6Al-4VBEAMAN, J. J; WILLIAMSON, R. L; MELGAARD, D. K et al.Journal of materials science. 2004, Vol 39, Num 24, pp 7153-7159, issn 0022-2461, 7 p.Conference Paper

Microstructure evolution during warm working of Ti-6Al-4V with a colony-α micro structureMIRONOV, S; MURZINOVA, M; ZHEREBTSOV, S et al.Acta materialia. 2009, Vol 57, Num 8, pp 2470-2481, issn 1359-6454, 12 p.Article

Influence of fluoride concentration and pH on corrosion behavior of Ti-6Al-4V and Ti-23Ta alloys in artificial salivaROBIN, A; MEIRELIS, J. P.Materials and corrosion (1995). 2007, Vol 58, Num 3, pp 173-180, issn 0947-5117, 8 p.Article

Effect of Strain-Path Reversal on Microstructure Evolution and Cavitation during Hot Torsion Testing of Ti-6Al-4VNICOLAOU, P. D; SEMIATIN, S. L.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2007, Vol 38, Num 12, pp 3023-3031, issn 1073-5623, 9 p.Article

Effect of hot deformation on the tribological behaviour of Ti-6Al-4V alloyISMAIL, A; ABDEL-AZIZ, M; EL-MORSY, A et al.Canadian metallurgical quarterly. 2006, Vol 45, Num 4, pp 469-473, issn 0008-4433, 5 p.Article